Bathroom remodeling help in Kirkland, WA & nearby areas(425) 555-0172

Kenmore ยท 98028

Bathroom Remodeling in Kenmore, WA

Kenmore's housing is newer than King County's average, with a mix of single-family and multifamily homes. Call now to speak with a local bathroom remodeling contractor.

Bathroom remodeling in Kenmore

Kenmore sits where the Sammamish River meets the north end of Lake Washington, with a housing stock that is newer than King County's overall and a mix of single-family homes and multifamily buildings. For a shower, tub, accessible bath, tile or vanity project, call (425) 555-0172 to speak with a local bathroom remodeling contractor.

About bathroom remodeling in Kenmore

Kenmore had 23,914 residents at the 2020 Census and incorporated in 1998, though it began as John McMasters's shingle mill and company town in 1901. It lies about 12 miles northeast of downtown Seattle and has a waterfront on Lake Washington, with Log Boom Park, the Kenmore Air Harbor seaplane base and Saint Edward State Park nearby. Its ZIP code is 98028.

The city's housing plan gives a clear picture: about 69 percent of homes are single-family detached, about 28 percent are in multifamily buildings, and about 3 percent are mobile homes. Only about a quarter of homes are more than 50 years old, compared with 37 percent countywide, so many Kenmore bathrooms are newer than people expect, while others are original to mid-century. That's a reason to start every Kenmore project with an inspection rather than an assumption. See also bathroom remodeling in Kirkland, WA.

Shower remodel in Kenmore

Updating newer showers

In homes built in recent decades, the shower may be sound but dated: a fiberglass unit, a builder-grade door or a cramped footprint. Upgrading finishes and glass while keeping the layout controls cost. See shower remodeling.

Rebuilding older showers

Older mid-century bathrooms need waterproofing from the studs out, and demolition often reveals water damage that must be repaired first.

Tub-to-shower conversion in Kenmore

Homes with more than one bathroom

Many newer homes have two or more bathrooms, which makes it easy to convert one tub to a shower and keep another. See tub-to-shower conversion.

Townhomes and multifamily units

Converting a tub in a townhome or condo works best with a prefabricated base and wall panels, and it requires association approval. Ask about work hours and waterproofing standards.

Bathtub replacement in Kenmore

Swapping worn tubs

A new acrylic tub in the same alcove is the simplest replacement. Choose the surround at the same time, since the wall edges are disturbed. See bathtub replacement.

Adding a soaking tub

Primary baths in newer homes sometimes have room for a freestanding or drop-in soaking tub. Check floor support and the water heater's capacity first.

Accessible bathroom remodel in Kenmore

Single-level living upgrades

For homeowners staying long-term, a zero-threshold shower and grab-bar blocking are the highest-value changes. See accessible bathroom remodeling.

Newer homes with wider layouts

Newer homes can have wider doors and more floor space than mid-century homes, which can make accessibility changes simpler. A contractor can measure and tell you what's feasible.

Bathroom tile and flooring in Kenmore

Moisture-smart choices near the lake

Porcelain floors and a properly waterproofed shower are the foundation of a durable bathroom near the water. See bathroom tile and flooring.

Replacing carpet or vinyl

Some bathrooms still have carpet or sheet vinyl. Replacing them with tile or vinyl plank, over a sound subfloor, makes the room easier to clean and more resistant to moisture.

Vanities and countertops in Kenmore

Choosing a size that fits

Measure for door swing, toilet clearance and the tub before choosing a width. See the bathroom vanity size guide.

Pairing with new lighting

A new vanity is a good moment to improve lighting at the mirror, which is electrical work. See vanities and countertops for the full range.

Permits and rules in Kenmore

Kenmore is an incorporated city with its own permit process, separate from Kirkland's, so ask the City of Kenmore which permits your project needs. Statewide rules still apply: electrical wiring work needs a licensed electrical contractor, circuit wiring needs a permit, and general contractors must be registered with Washington L&I. Use our hiring checklist to verify a contractor before you sign.

Nearby areas

Kenmore borders Bothell to the north and east, and Kirkland lies across the lake's north end. Neighborhoods like Juanita share many of the same project types. For a wider look at what remodeling involves, see bathroom remodeling in Kirkland.

Frequently asked questions

Are Kenmore homes older or newer than average?

Newer than King County's average. According to the city's housing plan, about 25 percent of Kenmore homes are more than 50 years old, compared with 37 percent countywide.

Does Kenmore have its own permit office?

Yes. Kenmore is an incorporated city, so permits come from the City of Kenmore, not from Kirkland or King County.

What share of Kenmore homes are single-family?

About 69 percent are single-family detached homes, according to the city's housing plan.

What is Kenmore's ZIP code?

Kenmore's ZIP code is 98028.
Call now · (425) 555-0172